The EACVI aims to set up a European standard in laboratory practices and patient care.
Requirements
Eligibility rules
To be eligible, CMR laboratories should meet the following requirements:
- Must be established for at least three years.
- The application must be submitted by an ESC CMR Level 3 certified physician.
- The MRI service must include at least one trained cardiac MRI radiographer, and at least one appropriately trained cardiac MRI physician (Level 2 or Level 3) - access to a current EACVI CMR Level 3 certified physician (or equivalent) if the appropriately trained physician is only Level 2.
If a CMR radiographer certificate is not available in the applicant’s country the applicant must provide:
1. A general radiographer diploma or alternatively, any national or institutional certification related to MRI or advanced cardiac imaging training
2. A formal signed letter from the head of the radiology or cardiology department confirming the radiographer’s active involvement in CMR procedures over the past three years.
If a CMR radiographer certificate is not available in the applicant’s country the applicant must provide:
1. A general radiographer diploma or alternatively, any national or institutional certification related to MRI or advanced cardiac imaging training
2. A formal signed letter from the head of the radiology or cardiology department confirming the radiographer’s active involvement in CMR procedures over the past three years.
- There is no restriction on the type of centres (private, university laboratories, etc.), all institutions can apply
- The lab must fulfil a list of criteria.
Please note: Laboratories that achieve accreditation status may be randomly selected for a visit from the Committee to verify the information in their submitted documents.
Language of submission
The application and all documentation should be submitted in English.
General rules
- The CMR laboratory accreditation and Specialist CMR laboratory accreditation for congenital heart disease modules can be standalone lab certifications.
- The CMR laboratory accreditation is mandatory in order to apply for the Specialist CMR laboratory accreditation for stress imaging module.
- To be eligible for accreditation, the CMR laboratory must fulfil all listed criteria.
- The EACVI Committee Members may visit any EACVI accredited laboratory to proceed with an on-site inspection and verification.
Applying for advanced accreditation does not guarantee being granted this grade.
Process for applications
EACVI Laboratory accreditation applications are submitted online and can be done at any time.
What happens after laboratories have submitted their application online?
- Once submitted, an application can no longer be edited.
- The EACVI Accreditation Office is notified automatically. The application is initially reviewed by the EACVI Accreditation Office for an administrative check.
- If the application is incomplete, the laboratory will be contacted and asked to supply missing information within one month.
- If the application is complete, it will be sent to reviewers nominated by the European CMR Certification Board for review and recommendations. This process may take up to two months.
- If some information is missing, laboratories will be contacted by the EACVI Accreditation Office and asked to supply relevant information.
- Upon completion of the review process, CMR Laboratories will be informed by email of the results of their application by the EACVI Accreditation Office.
- An EACVI Laboratory Accreditation Diploma will be awarded to successful institutions.
- Laboratories that achieve accreditation status may be selected at random for a visit or video call from the Board to verify the information on their submitted documents.
- The accredited laboratories will be listed on the EACVI website.
- A diploma will be issued and awarded at the EuroCMR conference.
Please feel free to contact us to express your interest and request an application form.
Multiple sites accreditation
If two or more laboratories belong to the same legal entity (trust), the trust may apply for accreditation for part of its sites or for all of its sites.
Requirements
The trust will be requested to provide:
- A letter specifying:
- the details of the sites that the trust intends to request accreditation for
- the modalities for which every site wants to apply
- the name of the contact person for the trust
This letter must be written on letterhead paper and manually or electronically signed by the responsible person (no typed signature)
- An accreditation application for every site, with the documentation corresponding to the modalities the site is applying for. Every site needs to comply with the accreditation criteria.
The review process for each application remains the same as described above.
At the end of the process, the trust will receive a letter indicating the accreditation modalities granted to each site and an accreditation certificate for each site.
Fees
The trust can benefit from a specific fee for a multi-site accreditation request.
A 20% discount will be applied to the total amount that all sites have to pay.
Example: if the accreditation includes 4 sites
- Site 1:
- One modality: CMR – Accreditation fee: €417
- Site 2:
- Three modalities: CMR + CMR CHD + CMR SI – Accreditation fee: €833
- Site 3:
- Two modalities: CMR + CMR CHD – Accreditation fee: €625
- Site 4:
- One modality: CMR CHD – Accreditation fee: €417
- TOTAL that all sites have to pay: €2,292 - with a 20% discount = €1,834
Reaccreditation
The accreditation is valid for five years. The reaccreditation process will be provided in due time.
Laboratories accredited by EACVI
Please find here the current list of EACVI CMR accredited laboratories
Criteria for a CMR Laboratory
A CMR Lab requires to have been established for at least three years and to fulfil the following criteria:
Equipment
MRI scanner
- A fully maintained, MRI scanner (minimum 1.5 Tesla) with
- Dedicated cardiac imaging software
- Multi-element phased array receiver coil
- ECG gating/triggering
Specific cardiac sequences
- Minimal requirement:
- Cine sequences (e.g. SSFP, GRE)
- Oedema sequences (black blood T2W TSE with/without fat saturation
- Anatomical sequences (black blood T1W TSE with/without fat saturation
- Single shot black blood prepared TSE sequences
- Flow sequences (phase contrast)
- Contrast enhanced angiography sequence (GRE)
- Late Gadolinium Enhancement imaging (IR-GRE, SS-SSFP)
- First pass perfusion sequences (GRE, SSFP, EPI)
- Desirable:
- Realtime cine sequence
- Alternative late gadolinium enhancement sequences (3D, PSIR)
- Non contrast 3D whole heart sequence
- 4D flow sequences
- Other sequences (tagging, coronary sequence, cardiac iron (T2*), mapping techniques (T1/T2-mapping).
Dedicated Software for CMR analysis
- Minimal requirement:
- Volumetric quantification of LV/RV volumes and mass
- Quantification of flow and velocity
- 3D angiographic visualisation
- Desirable:
- T2* mapping analysis for iron quantification
- Perfusion analysis tools
- Late gadolinium enhancement quantification
- Advanced 3D angiographic reconstruction
- 4D flow assessment
- Tagging analysis
- Feature/tissue tracking analysis
Other required equipment
- Access to resuscitation facilities (including defibrillation/pacing/oxygen/suction)
- Access to an emergency trolley with specific drugs to deal with potential reactions to iv contrast media and stressors[i]
- Access to MR conditional/detachable table or trolley for patient evacuation
- Access to monitoring equipment: non-invasive blood pressure, ECG and SpO2 monitoring device
- Access to MR conditional power injectors
- Access to infusion pumps (either MRI conditional or connectable to the patient in MRI room from control room)
Staff, scanning and reporting procedures
Staff
Minimal team requirements to deliver a clinical cardiac MRI service:
- At least one trained cardiac MRI radiographer
- At least one appropriately trained cardiac MRI physician (level 2 or level 3)
Access to a current ESC CMR Level 3 (or equivalent e.g. SCMR Level III) certified physician (if the appropriately trained physician is only level 2)
Scanning procedures:
- Good practice procedures should be in place and appropriately organised
- Patient confidentiality must be maintained always
- Established safety procedures that are known to all staff
- The patient needs to complete and sign a MRI safety questionnaire before the test
- Scan protocols adherent to guidelines (e.g. SCMR scanning protocols)
- At least 2 staff members (either radiographer, nurse, fellow, physician) should be present during non-stress scanning
- For stress scanning at least 1 staff member should have a valid ALS or ILS qualification
Reporting procedures
All clinical CMR scans should have a report generated by a level 2 or level 3 cardiac MRI certified physician, with the following recommendations:
- If the reporter is a CMR level 2 certified physician, a CMR level 3 certified physician should be available to discuss cases when needed.
- CMR level 1 certified physicians should not sign off reports. However, they are encouraged to pre-report scans under the clear supervision of a CMR level 2 or level 3 certified physician
Audit and quality control
Quality control processes are encouraged and include:
- Regular audit
- Regular clinical governance meetings to address safety and other issues
- Case review and discrepancy meetings
CMR laboratory annual numbers
ESC/EACVI CMR laboratory
ESC/EACVI recommends that CMR labs perform a minimum of 500 cases per year The following types of studies should be included:
- Cardiomyopathies
- Ischaemic heart disease
- Vascular disease
Specialist CMR laboratory for stress imaging
ESC/EACVI recommends that specialist CMR labs perform a minimum of 300 stress CMR cases per year using physical or pharmacological stressors, in addition to the standard 500 cases per year.
Specialist CMR laboratory for congenital heart disease
ESC/EACVI recommends that specialist CMR labs for congenital heart disease perform a minimum of 250 cases/year of paediatric and/or adult congenital heart disease. Specialist CMR laboratory for congenital heart disease can be a standalone lab certification.
